VW Golf manuals

Volkswagen Golf Service & Repair Manual: Assembly overview - poly V-belt drive, vehicles without air conditioner compressor

Assembly overview - poly V-belt drive, vehicles without air conditioner compressor

1 -  Bolt
Renew
150 Nm +180°
Use counterhold -T10475- to loosen and tighten.
Risk of damage to engine caused by incorrect valve timing.Do not turn crankshaft out of TDC position.
2 -  Vibration damper
Removing and installing → Chapter
Risk of damage to engine caused by incorrect valve timing.Do not turn crankshaft out of TDC position.
3 -  Poly V-belt
Check for wear
Before removing, mark direction of rotation with chalk or felt-tipped pen.
Do not kink
The length of the poly V-belt must be determined according to the → Electronic Parts Catalogue depending on the version of overrunning alternator pulley.
Poly V-belt routing → Anchor.
Removing and installing → Chapter
When installing, make sure it is properly seated on pulleys.
4 -  Bolt
Renew
20 Nm + 90°
5 -  Tensioner for poly V-belt
Pivot with socket to slacken poly V-belt
Lock with locking pin -T10060 A-.
Removing and installing → Chapter
6 -  Bolt
Specified torque → Electrical system; Rep. gr.27
7 -  Alternator
Removing and installing → Electrical system; Rep. gr.27
With freewheel
Various versions of the overrunning alternator pulley, -A- or -B-, may be fitted depending on the type and version of alternator → Fig..

 
Allocation of overrunning alternator pulley
The length of the poly V-belt must be determined according to the → Electronic Parts Catalogue depending on the version of overrunning alternator pulley.
 

Assembly overview - poly V-belt drive, vehicles without air conditioner compressor

Cylinder block (pulley end)
...

Assembly overview - poly V-belt drive, vehicles with air conditioner compressor
1 -  Poly V-belt Check for wear Before removing, mark direction of rotation with chalk or felt-tipped pen. Do not kink ...

Other materials:

Removing and installing evaporator
  Note The illustration shows a left-hand drive vehicle. The removal and installation procedure is identical for both versions. Removing –  Observe instructions when working on refrigerant circu ...

Cleaning cloth seat covers, fabric trim and Alcantara® upholstery
First read and observe the introductory information and safety warnings Cleaning upholstery on seat cushions without seat heating, seats that are not electrically adjustable, and seats that do not contain airbag components Airbag-related components and electrical connectors may be installe ...

Wheel allocation
6 J x 15 6 J x 15   Note Always observe the allocation of wheels and tyres to the respective engines, which are listed in the overview table. Explanation of information on wheels: → Wheels and Tyres Guide - General informatio ...

© 2016-2024 Copyright www.vwgolf.org