Volkswagen Golf Service & Repair Manual: Assembly overview - long noise insulation
Note
| The removal and installation procedures may have to be modified
slightly depending on engine fitted. |
| 1 - |
Short noise insulation |
| – |
Remove bolts -2-,
-3- and -4-. |
| – |
Pull out noise insulation off lock carrier to the back. |
- Qty. 3 on left
- Qty. 4 on right
- 2.0 Nm
- Micro-encapsulated; renew after each removal
- Qty. 3
- 6.0 Nm
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
1 -
Short noise insulation
Rem ...
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
1 -
Underride guard
Removing
...
Other materials:
Overview of fitting locations – lights in rear doors
1 -
Door warning lamp and entry light
Driver side door warning lamp -W30- and front passenger entry light
-W93-
Front passenger side door warning lamp -W36- and driver side entry
light -W92-
Removing and installing ...
Additional information
Technical Service Handbook with measures for rectifying
latest malfunctions.
Workshop manual for service work specific to model
→ Heating, air conditioning; Rep. gr.87.
→ Current
...
Removing and installing oil pump
Removing
–
Remove sump (bottom section)
→ Chapter.
–
Unclip cover for oil pump drive sprocket
-arrows-.
...
© 2016-2024 Copyright www.vwgolf.org
Assembly overview - short noise insulation
Assembly overview - skid plate