1 - | Cover for mirror |
Material: ABS |
Removing and installing → General body repairs, exterior; Rep. gr.66. |
2 - | Bolt |
Qty. 2 |
Specified torque: 1.0 Nm |
3 - | Turn signal |
Removing and installing → Chapter |
4 - | Bolt |
Specified torque: 9.0 Nm |
5 - | Bolt |
Specified torque: 9.0 Nm |
6 - | Fastener |
7 - | Cap |
8 - | Mirror glass |
Removing and installing → General body repairs, exterior; Rep. gr.66. |
9 - | Bolt |
Qty. 2 |
Specified torque: 1.0 Nm |
10 - | Mirror frame |
Removing and installing → General body repairs, exterior; Rep. gr.66. |
11 - | Bolt |
Qty. 3 |
Specified torque: 1.0 Nm |
12 - | Adjustment unit |
Removing and installing → General body repairs, exterior; Rep. gr.66. |
13 - | Entry light in exterior mirror |
Driver side entry light in exterior mirror -W52- |
Front passenger side entry light in exterior mirror -W53- |
Removing and installing entry light in exterior mirror → Chapter. |
14 - | Mirror mounting |
Removing and installing → General body repairs, exterior; Rep. gr.66. |
Removing and installing suction-jet pump
On vehicles with four-wheel drive the fuel tank is divided
into a left and a right chamber. A suction-jet pump
-2- is used for delivering fuel
from the left fuel tank chamber to the baffle housing of the
fuel delivery unit -1- on the
right.
...
Removing and installing retaining plate for manually operated anti-dazzle
interior mirror, with rain and light sensor -G397- and without front camera for
driver assist systems -R242-
Note
With the repair procedure described, it is no longer
necessary to renew the windscreen.
At the same time, it is also possible to reuse the
old mirror base which has fa ...
Removing and installing cap on ignition key
Removing
–
Lift off lid for battery compartment
→ Chapter.
–
Remove bolt -1-.
–
Push cap -2- out from the ignition key
laterally -arrow-.
Installing
Note
Us ...