Volkswagen Golf Service & Repair Manual: Assembly overview - interior monitoring, RHD vehicles
1 - |
Button for deactivating interior monitoring and vehicle inclination
sensor -E616- |
Removing and installing
→ Chapter |
2 - |
Anti-theft alarm system sensor -G578- |
Removing and installing
→ Chapter |
Needs parameterisation after renewal
→ Chapter |
Removing and installing
→ Chapter |
5 - |
Onboard supply control unit -J519- |
With central locking and anti-theft alarm system aerial -R47- |
Overview of fitting locations
→ Chapter |
Removing and installing
→ Chapter |
Removing and installing
→ Chapter |
1 -
Anti-theft alarm system sensor -G578-
Removing and installing
→ Chapter
Needs parameterisation after renewal
→ ...
Removing
–
Remove plenum chamber cover
→ General body repairs, exterior; Rep. gr.50.
...
Other materials:
Assembly overview - dash panel insert
1 -
Electrical connector
For dash panel insert
2 -
Dash panel insert -KX2-
With control unit in dash panel insert -J285-.
Dash panel insert must be renewed if warning lamp LED or
illumination ...
Repairing threaded connections
Special tools and workshop equipment
required
VAG 1331
Note
The use of penetrating fluid, contact spray or grease etc.
is prohibited since the missing ad ...
Removing and installing head restraint
Removing
–
Press release button -3- for
height adjustment on head restraint guide
-4- in -direction of arrow-.
–
At the same time pull head restraint
-1- out of rear seat backrest -2-
...
© 2016-2024 Copyright www.vwgolf.org