1 - | Anti-theft alarm system sensor -G578- |
Removing and installing → Chapter |
Needs parameterisation after renewal → Chapter |
2 - | Bolt |
Qty. 4 |
Specified torque: 1 Nm |
3 - | Cover |
Removing and installing → Chapter |
4 - | Button for deactivating interior monitoring and vehicle inclination sensor -E616- |
Removing and installing → Chapter |
5 - | Onboard supply control unit -J519- |
With central locking and anti-theft alarm system aerial -R47- |
Overview of fitting locations → Chapter |
6 - | Alarm horn -H12- |
Removing and installing → Chapter |
7 - | Nut |
Qty. 2 |
Specified torque: 9 Nm |
8 - | Bracket |
Removing and installing → Chapter |
9 - | Nut |
Specified torque: 6 Nm |
Assembly overview - dash panel insert
1 -
Electrical connector
For dash panel insert
2 -
Dash panel insert -KX2-
With control unit in dash panel insert -J285-.
Dash panel insert must be renewed if warning lamp LED or
illumination ...
Removing and installing Blind Spot Monitor control unit J1086/J1087
Removing
–
Disconnect electrical connector -2-.
–
Unscrew nut -1- and bolts
-4- for bracket.
...
Flat spots caused by storage or handling
What is a flat spot?
The terms flat area and flats are also used for the term
flat spot.
Flat spots caused by storage or handling also cause
vibration in the same way as incorrectly balanced wheels do. It
is import ...