Volkswagen Golf Service & Repair Manual: Assembly overview - impact bar

Volkswagen Golf Service & Repair Manual / General body repairs, exterior / Bumper / Front bumper / Assembly overview - impact bar

Assembly overview - impact bar

1 -	Impact bar

2 -	Guide bracket

Left and right

3 -	Hexagon nut

Qty. 2 on each side
2.0 Nm

4 -

Bolt

Qty. 2 on each side
8 Nm

5 -

Bolt

Qty. 4 on each side
55 Nm

6 -	Pedestrian protection

Not installed in all markets

7 -

Pop rivet

Left and right
Insert with special pop rivet pliers -V.A.G 1753A-

8 -	Foam element

Self-adhesive
Not installed in all model versions

9 -	Butyl strip

Qty. 3 with adhesive film

Assembly overview - bumper cover

Note Minor differences may be encountered in respect of bumper cover, depending on vehicle model. 1 - Bumper cover Material PP/EPDM Re ...

Removing and installing bumper cover

Volkswagen R GmbH, optional equipment, “R Line” and “R” Special tools and workshop equipment required ...

Other materials:

Removing and installing intermittent wiper switch -E22-
Note The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column combination switch -E595-. These switches cannot be separated. ...

Assembly overview - rear window
1 - Rear window Removing and installing → Chapter 2 - PUR adhesive sealant Cross section of bead: -width b- = 7 mm, -height a- = 10 mm (including precoating, residual material on window glass and w ...

Golf BlueMotion - from model year 2013, sales type 5G1
Note The specified wheel and tyre combinations apply for all the gearboxes allocated to the respective engines. Deviations from this are specially indicated in the table. Depending on equipment, the wheel-and-tyre combination 185/70 R15 on ...