1 - | Brake light connector |
2 - | Washer fluid line |
3 - | High-level brake light |
With high-level brake light bulb -M25-. |
Removing and installing → Chapter |
Checking inner constant velocity joint
The joint is to be dismantled to renew the grease if it is
heavily soiled, or to check the running surfaces of the balls
for wear and damage.
Note
The ball hub and joint body are paired. Mark position in
relation to each o ...
General information
Repair instructions for repair work on ABS
The ABS brake system is divided diagonally. The
servo-assistance is effected pneumatically by the vacuum brake
servo unit.
Vehicles with ABS are not fitted with a mechanical bra ...
Removing and installing fresh air blower control unit -J126-, RHD vehicles
Removing
–
Remove baffle plate
→ Chapter.
–
Disconnect electrical connectors -1-
and -4-.
–
Remove bolts ...