Volkswagen Golf Service & Repair Manual: Assembly overview - gas discharge headlight with cornering light and LED daytime running light

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Headlight / Assembly overview - gas discharge headlight with cornering light and LED daytime running light

Assembly overview - gas discharge headlight with cornering light and LED daytime running light

1 -

Headlight

Removing and installing → Chapter

2 -	Front turn signal bulb

Front left turn signal bulb -M5-

Front right turn signal bulb -M7-

Removing and installing → Chapter

3 -	Cornering light bulb

Left cornering light bulb -L148-

Right cornering light bulb -L149-

Removing and installing → Chapter

4 -	Housing cover

5 -	Gas discharge bulb

With integrated starter unit

Left gas discharge (xenon) bulb -L13-

Right gas discharge (xenon) bulb -L14-

Removing and installing → Chapter

6 -	Headlight range control motor

Left headlight range control motor -V48-

Right headlight range control motor -V49-

Removing and installing → Chapter

7 -	Housing cover

With bolts

Qty. 5

Specified torque: 1.5 Nm

8 -

Bolt

With compensation element

Specified torque: 4 Nm

9 -

Bolt

With compensation element

Specified torque: 8 Nm

10 -

Bolt

Specified torque: 4 Nm

11 -	Output module for headlight

Output module for left headlight -J667-

Output module for right headlight -J668-

Removing and installing → Chapter

Specified torque: 1.7 Nm

12 -	Gas discharge bulb control unit

Left gas discharge bulb control unit -J343-

Right gas discharge bulb control unit -J344-

Removing and installing → Chapter

Specified torque: 1.7 Nm

13 -	Control unit for daytime running light and side light

Control unit for left daytime running light and side light -J860-

Control unit for right daytime running light and side light -J861-

Removing and installing → Chapter

Specified torque: 1.7 Nm

14 -	Cornering light and headlight range control unit -J745-

Removing and installing → Chapter

15 -	Vehicle level sender

Removing and installing → Running gear, axles, steering; Rep. gr.43.

16 -

Stop bolt

For longitudinal adjustment of headlight

17 -

Bolt

With banjo bolt

For height adjustment of headlight

Specified torque: 4 Nm

Assembly overview - gas discharge headlight

1 - Headlight Removing and installing → Chapter 2 - Front turn signal bulb Front left turn signal ...

Assembly overview - gas discharge headlight with dynamic high beam control and LED daytime running light

1 - Headlight Removing and installing → Chapter 2 - Front turn signal bulb Front left turn signal ...

Other materials:

Removing and installing brake servo, LHD vehicles
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Torque wrench -V.A.G 1410- ...

Notes on repairs to airbag and belt tensioner wiring
In addition to the general notes on repairs to wiring harnesses, the following instructions must be observed on how to repair wiring in airbag and belt tensioner systems: WARNING Airbag a ...

Assembly overview – gas discharge headlight with dynamic high beam control and LED daytime running light, »R«
1 - Headlight Front left headlight -MX1- Front right headlight -MX2- Removing and installing → Chapter 2 - Side light bulb Left side light bulb -M1- ...