Volkswagen Golf Service & Repair Manual: Assembly overview - front passenger side airbag
| 1 - | Electrical connections |
- For front passenger side airbag igniter 1 -N131
| 2 - | Bolts |
- Qty. 2
- Clean prior to reinstalling
- Use with locking fluid D 197 300 A2.
- 8 Nm
| 3 - | Dash panel |
- Renew dash panel after airbag has deployed → Chapter
| 4 - | Bolts |
- Qty. 2
- Clean prior to reinstalling
- Use with locking fluid D 197 300 A2
- 8 Nm
| 5 - | Front passenger side airbag |
- With front passenger side airbag igniter 1 -N131-
 WARNING
|
| Can be locked and activated via key-operated switch |
| Removing and installing → Chapter |
Removing and installing front passenger airbag unit with front passenger
side airbag igniter 1 -N131-
Removing
WARNING
Observe safety instructions for pyrotechnic
...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Technical requirements
→ Mechanically positioned ball coupling
→ Fitting a bicycle carrier on the mechanically positioned ball coupling
→ Hitching and connecting the trailer
...
Assembly overview - belt pulley, Sanden air conditioner compressor
1 -
Nut
25 Nm
Note
In order to protect the thread of the air conditioner compressor
drive shaft an additional plastic cap is fitted (not shown in
illustration).
–
To unfasten and tighten the hex ...
Removing and installing drive shaft, left drive shaft, constant velocity
joints VL100 and VL107, except for e-Golf
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Press tool -T10520-
...
