Volkswagen Golf Service & Repair Manual: Assembly overview - door handle and door lock
Note| Only the left side is shown. The right side is similar. |
| 1 - | Door lock |
- Removing and installing → Chapter
| 2 - | Bolt |
- 3 Nm
- For lock cylinder
| 3 - | Mounting bracket |
- Removing and installing → Chapter
| 4 - | Lock cylinder |
- Removing and installing → Chapter
- Only installed on driver door.
| 5 - | Base |
| 6 - | Cap |
- Remove and install for lock cylinder → Chapter
- Removing and installing without lock cylinder → Chapter
| 7 - | Door handle |
- Removing and installing → Chapter
| 8 - | Bolt |
- 1.5 Nm
- Bearing plate is loosened from door when this bolt is loosened
| 9 - | Cable |
- From door lock -1- to mounting bracket -3-
| 10 - | Cable |
- From inner door handle to door lock -1-
- With grommet to passage on cover
| 11 - | Bolt |
- Qty. 2
- 18 Nm
| 12 - | Cap |
Assembly overview - window regulator
1 -
Front door
2 -
Hexagon nut
Qty. 5
6 Nm
3 -
Window regulator
Removing and installing
& ...
Removing and installing window regulator motor -V14-/-V15-
Special tools and workshop equipment
required
Note
...
Other materials:
Removing and installing infotainment system display
Special tools and workshop equipment
required
Removal wedge -3409-
Radio release tool -T10057-
Removing
...
Assembly overview - front three-point seat belt, 2-door model
1 -
Bolt
If removed due to an accident with seat belt fastened, renew bolt.
20 Nm
2 -
Belt end fitting
Removing and installing
→ Chapter
3 -
Bolt
If removed due to an accident w ...
Removing and installing lower suspension link, vehicle with dual clutch
gearbox 0D9
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Removing
–
Loosen wheel bolts.
–
...
