Volkswagen Golf Service & Repair Manual: Assembly overview - data bus diagnostic interface
| 1 - | Electrical connector |
| For data bus diagnostic interface -J533- |
| 2 - | Data bus diagnostic interface -J533- |
| Removing and installing → Chapter |
| 3 - | Bolt |
| Specified torque → General body repairs, interior; Rep. gr.70 |
| 4 - | Crash bar |
| Assembly overview → General body repairs, interior; Rep. gr.70 |
| 5 - | Central tube for dash panel |
Assembly overview - control units, RHD vehicles
1 -
Bracket
For onboard supply control unit -J519-
Removing and installing
→ Chapter
2 -
Onboard ...
Removing and installing onboard supply control unit -J519-, LHD vehicles
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
&# ...
Other materials:
Removing and installing ignition coils with output stage
Special tools and workshop equipment
required
Puller -T10530-
Note
The ignition coils are easier to remove when the engine is
warm. The grease used durin ...
Overview of fitting locations – lights in roof trim
1 -
Driver side illuminated vanity mirror -W20-
In the case of vanity mirrors with LED lighting, the entire light
must be renewed in the event of a fault.
Removing and installing
→ Chapter
2 -
...
2-pack VHS hardeners and 2-pack VHS Performance hardeners
Designation:
2-pack VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
2-pack VHS hardener, fast-drying -LHA 009 050 A2-
2-pack VHS hardener, slow-drying -LHA 009 052 A2-/-LHA 009
052 A3-
...
