1 - | Electrical connector |
For dash panel insert |
2 - | Dash panel insert -KX2- |
With control unit in dash panel insert -J285-. |
Dash panel insert must be renewed if warning lamp LED or illumination for dash panel insert is defective |
Removing and installing → Chapter |
3 - | Dash panel insert trim |
Removing and installing → General body repairs, interior; Rep. gr.70. |
4 - | Steering column trim (top) |
Assembly overview → General body repairs, interior; Rep. gr.68. |
5 - | Bolt |
Qty. 2 |
Specified torque: 2.5 Nm |
Removing and installing brake light switch, RHD vehicles
Removing
Vehicle with diesel engine:
–
Remove engine cover panel
→ Rep. gr.10.
The fuel system is pressurised.Risk of injury due to fuel which may
...
Checking inertia reel (locking mechanism)
The inertia reel has two locking functions.
The first locking function is triggered by the belt being
jerked out of the reel (belt extension acceleration).
Test 1
–
Pull belt o ...
Removing and installing drive shaft, left drive shaft, constant velocity
joints VL100 and VL107, e-Golf
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Press tool -T10520-
...