Volkswagen Golf Service & Repair Manual: Assembly overview - brake caliper (PC57 brakes)
When carrying out repairs, install all parts supplied in repair kit. |
Use only methylated spirits for cleaning the brake. |
Apply thin coat of assembly paste G 052 150 A2 to brake cylinder,
piston and sealing ring. |
Apply thin coat of assembly paste G 052 150 A2 to thread before
screwing in. |
Insert into brake carrier and guide pin groove; grease groove
beforehand, use repair kit grease pack. |
Supplied as preassembled replacement part with greased guide pins
and protective caps. |
If protective caps or guide pins are damaged, install repair kit.
Use lubricant sachet supplied to lubricate guide pins. |
Removing and installing
→ Chapter |
When inserting piston, take care not to damage it. |
Removing and installing
→ Chapter |
Apply thin coat of assembly paste G 052 150 A2 to piston before
installing. |
Removing and installing
→ Chapter |
Special tools and workshop equipment
required
Removal wedge -3409-
...
Other materials:
Factors influencing the service life of tyres
The following factors influence a tyre's service life to
varying degrees.
Driving style:
Speed
Braking
Acceleration
Cornering
...
Removing and installing mounting bracket
Special tools and workshop equipment
required
Note
Removal and installation are described only for the right
door handle bracket. The right side is similar.
Removing ...
Removing and installing evaporator
Note
The illustration shows a left-hand drive vehicle. The
removal and installation procedure is identical for both
versions.
Removing
–
Observe instructions when working on refrigerant circu ...
© 2016-2024 Copyright www.vwgolf.org