Volkswagen Golf Service & Repair Manual: Assembly overview - brake caliper FS III
When carrying out repairs, install all parts supplied in repair kit. |
Use only methylated spirits for cleaning the brake. |
Apply thin coat of lithium grease -G 052 150 A2- to brake cylinder,
piston and seal. |
Before screwing in, grease thread with thin coat of lithium grease
-G 052 150 A2- |
Insert into brake caliper. |
Insert into sleeve bearing. |
Removing and installing
→ Chapter |
Apply thin coat of assembly paste G 052 150 A2 to piston before
installing. |
Removing and installing
→ Chapter |
Removing and installing
→ Chapter |
When inserting piston, take care not to damage protective cap |
When carrying out repairs, install all parts supplied in repair kit.
Use only methylated spirits for cleaning the brake.
Apply thin coat of lithium grease -G 0 ...
Other materials:
Closing the tailgate
Fig. 38 Open tailgate: handle recess for
closing the tailgate
First read and observe the introductory information
and safety warnings Closing the tailgate
Grip one of the handles in the interior trim of the tailgate (arrows).
Pull the tailgate down with some force until it e ...
Removing and installing seat trim on tunnel side
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
General description
WARNING
Danger of injury.
Before working on the battery, read through the
warning and safety regulations carefully, and comply
with them
→ Chapter.
...
© 2016-2024 Copyright www.vwgolf.org