1 - | Rear bench seat |
2 - | Guide |
3 - | Lid |
4 - | Arrester |
5 - | Mounting grommet |
Removing and installing spray jet, Golf
Note
The spray jet is installed in the high-level brake light.
Removing:
–
Remove high-level brake light
→ Chapter.
–&nbs ...
Testing quantity of fuel delivered
Note
Check fuel delivery rate as described in “Guided Fault
Finding” function, vehicle diagnostic tester in “Guided Fault
Finding” mode.
Conditions for checking fuel delivery rate (in short):
...
Removing and installing rear lid seal
In the factory a sealant is applied to the rear lid seal, the seal is fitted
to the body flange and then rolled on.
Note
When the seal is removed, the sealant on the inside of the seal will
be spread and the flanks will be bent out slightly. If the seal is then
refitted, sealing and fir ...