1 - | Lower transverse link |
2 - | Nut |
Renew after removing |
20 Nm +180° |
3 - | Coupling rod |
Removing and installing → Chapter |
4 - | Bolt |
Tighten evenly. |
Renew after removing |
20 Nm +90° |
5 - | Bolt |
Renew after removing |
6 - | Nut |
When tightening, counterhold at multi-point socket of coupling rod |
55 Nm |
7 - | Anti-roll bar |
With rubber bushes |
Removing and installing → Chapter |
8 - | Subframe |
Removing and installing auxiliary air heater element - Z35- with auxiliary
air heater control unit - J604-, RHD vehicles
Removing
–
Remove centre console
→ General body repairs, interior; Rep. gr.68.
–
Remove glove compartment
→ General body repairs, interior; Rep. gr.68.
...
Removing and installing air conditioner compressor fuse -S355-
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783
Torque wrench -V.A.G 1331-
Removing
...
Overview of the driver side
Fig. 5 Overview of the driver side (left-hand
drive vehicles)
Fig. 6 Overview of the driver side (right-hand
drive vehicles)
Key for and :
Button for interior monitoring
Light switch
Daytime running lights or daytime headlights
Automatic hea ...