Volkswagen Golf Service & Repair Manual: Assembly overview - anti-roll bar, multi-link suspension, four-wheel drive
| 1 - | Lower transverse link |
| 2 - | Nut |
| Renew after removing |
| 20 Nm +180° |
| 3 - | Coupling rod |
| Removing and installing → Chapter |
| 4 - | Bolt |
| Tighten evenly. |
| Renew after removing |
| 20 Nm +90° |
| 5 - | Bolt |
| Renew after removing |
| 6 - | Nut |
| When tightening, counterhold at multi-point socket of coupling rod |
| 55 Nm |
| 7 - | Anti-roll bar |
| With rubber bushes |
| Removing and installing → Chapter |
| 8 - | Subframe |
Assembly overview - anti-roll bar, multi-link suspension, front-wheel drive
1 -
Lower transverse link
2 -
Nut
Renew after removing
20 Nm +180°
3 -
Cou ...
Removing and installing anti-roll bar
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Re ...
Other materials:
Safety precautions when working on fuel supply system
Risk of injury due to highly-pressurised fuel.
The fuel system is under high pressure. Risk of injury due to fuel
which may spurt out.
–
Release high pressure before opening the fuel system.
& ...
Removing and installing battery, vehicles with high-voltage system
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1783-
...
Assembly overview - flap for charging bay
1 -
Flap for charging bay
Removing and installing
2 -
Bolt
For actuator
2 Nm
Qty. 3
3 -
Actuator
Removing and installing
4 -
Immediate charge button -E766-
...
