1 - | Connecting hose |
From air filter to pressure control valve |
2 - | Hose clips |
3 - | Pressure regulating valve |
With tank pressure sensor -G400- |
4 - | Bolts |
2.5 Nm |
5 - | Activated charcoal filter |
Fitting location: In rear right wheel housing beneath wheel housing liner |
Removing and installing → Chapter. |
6 - | Bolt |
20 Nm |
7 - | Breather line |
To fuel tank. |
8 - | Breather line |
To activated charcoal filter solenoid valve 1 -N80- |
9 - | Bolt |
2.5 Nm |
10 - | Air filter |
Blowing through refrigerant circuit with compressed air and nitrogen
Use compressed air to force moisture and other contaminants
out of the refrigerant circuit and use nitrogen to force
moisture out of the refrigerant circuit.
The method of blowing through the refrigerant circuit with
compressed air ...
Removing and installing ignition/starter switch
Removing
–
Remove lower steering column trim
→ General body repairs, interior; Rep. gr.68.
–
Disconnect electrical connector -1-.
...
Removing and installing fuel gauge sender -G-, vehicles with front-wheel
drive
Removing
–
Remove fuel delivery unit
→ Chapter.
–
Note colour assignment of cables -1-
for re-installation.
– ...