Volkswagen Golf Service & Repair Manual: Anti-corrosion treatment

Volkswagen Golf Service & Repair Manual / Electrical system, general information / Wiring / Contact surface cleaning set -VAS 6410- / Anti-corrosion treatment

Caution

Missing anti-corrosion treatment results in damage to the onboard supply.

Note

All threaded connections must be tightened to specified torque.

Always use hose supplied with anticorrosive agent tin.

Use protection wax for cold area.

Use cavity sealing agent for warm area.

The sealing agent independently reaches the respective points through capillary action.

–	Hold injector below ring terminal and spray pin all around.

Anti-corrosion treatment

–	Hold injector above ring terminal and spray pin and wiring eye all around.

Anti-corrosion treatment

Cleaning battery clamp and battery terminal

Special tools and workshop equipment required VAG 1331 Note The u ...

Renewing Lambda probe

Note Do not repair Lambda probe wires, since this can result in malfunctions. If necessary, replace attachment parts, cabl ...

Other materials:

Removing and installing Bowden cable for remote release mechanism for seat backrest
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Removing Bowden cable on backrest end – Remove rear seat backrest → Chapter. ...

Dismantling and assembling drive shaft, triple roller joint AAR3300i
Special tools and workshop equipment required Thrust plate -VW 401- Thrust plate -VW 402- Press tool -VW 408 A- Press tool -VW 411- Tube -VW 416 B- Th ...

Crankshaft dimensions
Risk of damage to bearing pedestals when the crankshaft is removed.If the bolts of the crankshaft bearing cap are loosened, the bearing pedestals of the cylinder block will be deformed, and damage to the bearings will result.Never remove the crankshaft. Measuring the ...