Releasing gas and draining rear gas-filled shock absorbers, DCC shock
absorbers
Clamp gas-filled shock absorber vertically in vice.
WARNING
Safety goggles must be worn when drilling.
–
Drill a 3 mm hole -A- through
...
Removing and installing ambient temperature sensor -G17
Note
The ambient temperature sensor -G17- is used for determining
the outside temperature and as a switch-on condition of the
auxiliary and supplementary heater via CAN bus.
–
Removing and installing ambient temper ...
Adjusting wiper arm
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
–
Remove wiper arm
→ Chapter.
–
Switch ...