Volkswagen Golf Service & Repair Manual: Air duct
| Assembly overview - air duct and air
distribution in passenger compartment |
| The assembly overview for air duct and air distribution is
identical with the respective assembly overview for vehicles
with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing driver side
footwell vents |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing front passenger
side footwell vents |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing rear footwell vent |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
| Removing and installing fresh air intake |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing cover for fresh
air intake |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing air intake duct |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Checking exhaust ventilation for passenger
compartment |
| Checking is the same as for a vehicle with air conditioning
system
→ Chapter. |
|
|
|
| Removing and installing exhaust
ventilation for passenger compartment |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing air duct for
defroster vent |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
| Removing and installing air duct for
centre dash panel vent |
| Removal and installation are identical with procedure for
vehicles with air conditioning system
→ Chapter. |
|
|
|
It is not necessary to extract the refrigerant and to remove
or disassemble the expansion valve and the evaporator. Further
procedure is identical with procedure for vehicles wi ...
Overview of control and display unit
1 -
Heated driver seat regulator
Optional
Seat heater has 3 heat settings. Current setting is shown b ...
Other materials:
Checking fuel delivery rate, vehicles with four-wheel drive
Special tools and workshop equipment required
Removal wedge -3409-
Remote control for V.A.G. 1348 -V.A.G 1348/3A-
Multimeter e.g. hand-held multimeter -V.A.G 1526E-
Test instrument adapter/DSO (5-pin) -VAS 5565-
...
Aqua Premium system
Designation:
Uni (solid-colour) waterborne mixing paint -LWM 083 ...-
Metallic, pearlescent, special-effect waterborne mixing
paint -LWM 084/ 086...-
Uni (solid-colour) waterborne base ...
Flat connector systems
Note
If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using the prescribed tool
→ Chapter.
...
© 2016-2025 Copyright www.vwgolf.org
Dismantling and assembling heater unit
Operating and display unit