VW Golf manuals

Volkswagen Golf Service & Repair Manual: Air conditioner compressor without magnetic clutch, with elastic drive coupling

The air conditioner compressor is driven directly by the power steering vane pump.
There is an overload protection on the drive shaft of the air conditioner compressor, which shears in the event of the air conditioner compressor seizing, thus permitting the power steering vane pump to remain operational.
The air conditioner compressor draws refrigerant gas from the evaporator, compresses it and sends it to the condenser.
  Note
The air conditioner compressor contains refrigerant oil, which is miscible with R134a refrigerant at all temperatures.
The maker's nameplate states the refrigerant for which the air conditioner compressor is suitable. A valve regulates the pressure on the low-pressure side within the specified range (regulation characteristic).
The regulating valve for this air conditioner compressor is externally activated.
The engine should be started only when the refrigerant circuit has been fully assembled → Chapter.
The air conditioner compressor has an internal oil circuit to ensure that the air conditioner compressor is not damaged when the refrigerant circuit is empty. This means that about 40 to 50 cm3 refrigerant oil remain in the air conditioner compressor.
 

Air conditioner compressor without magnetic clutch, with elastic drive coupling

Air conditioner compressor without magnetic clutch
The air conditioner compressor is driven by a V-belt from the engine. A shear link is incorporated in the air conditioner compressor V-belt pul ...

Electrical air conditioner compressor for high-voltage system
  WARNING High voltage on high-voltage system of hybrid vehicle! Health risks for persons wearing medical de ...

Other materials:

Retrofitting two-way radios
First read and observe the introductory information and safety warnings You will need an external aerial to use a two-way radio in the vehicle. Any retrofit installation of electrical or electronic equipment in the vehicle will affect its vehicle type approval. Under certain circumstances, ...

Removing and installing centre armrest
Special tools and workshop equipment required         Torque wrench -V.A.G 1410- Removing –  Open lid -2- for through-loading ...

Seam seals, front body
  Note Seam seals made during repair work must be identical in appearance and thickness to the original seam seals. To avoid damage or faulty operation, brush seam seals smooth near attachments which must be attached. ...

© 2016-2024 Copyright www.vwgolf.org