Volkswagen Golf Service & Repair Manual: Adjusting installation position of tail light
Note
Installation position can only be corrected on tail light
cluster on body. |
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
– |
Turn light switch to “0” position. |
– |
Open cover in luggage compartment side trim. |
|
|
|
– |
Loosen securing element -1- by
two turns. |
– |
Insert screwdriver T10 bit into trim openings
-2-. |
Note
Ensure that the tail light -3-
lies flush against the surrounding components. |
– |
Adjust installation position of tail light by screwing
adjuster elements in or out. |
– |
Tighten securing element -1-. |
– |
Close cover in luggage compartment side trim. |
→ Chapter „Assembly overview - tail lights in rear lid, with
bulbs“ |
|
|
|
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Other materials:
Front camera for assist systems
Removing and installing front camera for
driver assist systems
Removing
–
Switch off ignition and all electrical consumers.
–
If ignition key is present, disengage in position ...
Introduction
This chapter contains information on the following subjects:
→ Attaching the mounts and roof carrier
→ Loading the roof carrier
The roof of the vehicle has been designed for optimum aerodynamic effect. It
is therefore no longer possible to attach conventional roof carrie ...
Removing and installing coupling rod
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Removing
–
Loosen wheel bolts.
–
...
© 2016-2024 Copyright www.vwgolf.org