Volkswagen Golf Service & Repair Manual: Adjusting headlight installation position
Special tools and workshop equipment
required |
|
|
|
Torque wrench -V.A.G 1783- |
|
|
|
Torque screwdriver -VAS 6494- |
|
|
|
– |
Loosen bolts -3-,
-4-, -5- and
-6-. |
– |
Ensure uniform gap between headlight -1-
and wing. |
– |
Tighten bolts -5- and
-6-. |
– |
Adjust banjo bolt of bolt -3- and stop
bolt -2- to ensure gaps are even all round. |
– |
Tighten bolt -3- inside banjo bolt. |
– |
Check headlight setting and adjust headlight if necessary
→ Booklet36.1 |
→ Chapter „Assembly overview - headlight“ |
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Other materials:
Removing and installing treble horn -H2- / bass horn -H7-
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
Removing horn
–
...
Petrol
First read and observe the introductory information
and safety warnings Petrol types
Fuels with a maximum ethanol content of 10% (E10) can be used for refuelling.
Petrol types are categorised according to their octane number, e.g. 91, 95, 98
or 99 RON (RON = Research Octane Number). The ve ...
Assembly overview - radiator and radiator fan
1 -
Radiator
Removing and installing
→ Chapter
Change coolant after renewing.
2 -
Coolant hose
Pull out retaining clip to remove.
Connecting → Fig.
...
© 2016-2024 Copyright www.vwgolf.org