Operating the speed limiter
IntroductionBalancing wheel, checking radial and lateral run-out of wheels and tyres
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Removing and installing bracket for parking aid control unit -J446-/park
assist steering control unit -J791-, LHD vehicles
Special tools and workshop equipment
required
Feeler gauge
Removing
–
If fitted, remove parking aid control unit/park assist
steering control unit
→ Chapter.
...
Measuring tread depth
Note
The tread depth is measured in the main tread channels.
Do not measure at the TWIs (Tread Wear Indicators).
Measure the tread depth in the main tread channel, a ...