Plug-in connectors
Connection diagram - activated charcoal filterRemoving and installing door inner seal
During production, a sealant is applied to the door inner
seals, which are then placed on the door flange and rolled on.
Note
When removing the seal, the sealant is distributed across
the inside of the seal. The sid ...
Overview of fitting locations – lights in front doors
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Driver door opener illumination bulb -L108-
Removing and installing
→ Chapter
2  ...
Calibrating Blind Spot Monitor control unit -J1086-/-J1087-
Note
Before the actual calibration process of the control units,
the calibration unit -VAS 6350- needs to be set up as described
in the following chapter.
Special tools and workshop equipment
required
  ...