Volkswagen Golf Service & Repair Manual: ACC — Adaptive Cruise Control
Note
-
|
On vehicles with ACC, the trim in the right-hand
cover of the front bumper must not be painted during a
repair paint job or replacement. The ACC system located
behind can become operational due to the thickness of the
added paint layer. |
-
|
The cover over the distance control sensor in the
bumper grille consists of radar-permeable material. The
cover is heatable, in order to prevent functions from being
impaired by snow and ice. |
-
|
All changes to the surface, such as retrospective
paintwork, stickers and other retrospectively applied
objects may result in functional impairment. |
|
|
|
Control unit for proximity control -J428- |
The illustration shows the adaptive cruise control unit
-J428- on the Golf. The control unit on other vehicle models may
differ from that shown in the illustration. |
4 - |
Vertical adjusting screw |
6 - |
Adaptive cruise control sender/adaptive cruise control unit |
7 - |
Horizontal adjusting screw |
|
|
|
To avoid malfunctions in the parking aid sensor, always
observe the following when painting:
Painting new parts
M ...
Other materials:
Exterior mirrors
Fig. 94 In the driver door: rotary knob
for the exterior mirrors
First read and observe the introductory information
and safety warnings
When the ignition is switched on, turn the rotary knob
to the desired position:
Fold exterior
mirr ...
Undercoated areas, body overview indicating differing coat thicknesses
Note
Undercoating (stone-chipping protection) applied during repair work
must be identical in appearance and thickness to the original
undercoating.
Water drainage holes must remain clear.
All threaded studs and welded nuts with metric ...
Removing and installing front tunnel cross-piece
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Removing
–
If fitted, remove centre underbody panel
→ ...
© 2016-2024 Copyright www.vwgolf.org