Volkswagen Golf Service & Repair Manual: 2-pack HS Vario clear coat
| 2-pack HS Vario clear coat -L2K 769 K01 A5- |
| 2-pack HS Vario clear coat is a VOC compliant (VOC content <
420 g/l), high-grade and productive high-solid clear coat. |
| Versatile use with 2-pack HS and 2-pack VHS hardeners |
|
|
|
| Application with 2-pack HS hardeners |
| 2-pack HS hardener -LHA 009 041 A3- |
| 2-pack HS hardener, fast-drying -LHA 021 004 A3- |
| 2-pack HS hardener, slow-drying -LHA 009 047 A3- |
| 2-pack HS hardener, extra slow-drying -LHA 009 048 A3- |
| For elasticization, see
→ Anchor |
|
|
|
| Application time/pot life: |
| – |
Mixed for spraying: 60-90 minutes at +20°C (depending on the
hardener used) |
|
|
|
| Method of application: “spray”. |
|
|
|
| – |
The application viscosity at +20 °C is the “compliant” and
“HVLP” mixing viscosity. |
|
|
|
| – |
Adjust spray nozzle following manufacturer's instructions to
1.2-1.3 mm for “compliancy”. |
| – |
Adjust spray nozzle following manufacturer's instructions to
1.3-1.4 mm for “HVLP”. |
| – |
Adjust spray pressure following manufacturer's instructions
to 2.0-2.5 bar for “compliancy”. |
| – |
Adjust atomising pressure following manufacturer's
instructions to 0.7 bar for “HVLP”. |
|
|
|
| – |
Apply in one-and-a-half coats. |
 Note
| The first half-coat should form a nearly complete, thin film
over which a full spray coat is directly sprayed. |
| – |
The specified thickness for the dry film is 50-60 µm. |
|
|
|
| Application with 2-pack VSH hardeners |
| 2-pack VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5- |
| 2-pack VHS hardener, fast-drying -LHA 009 050 A2- |
| 2-pack VHS hardener, slow-drying -LHA 009 052 A2-/-LHA 009
052 A3- |
| 2-pack VHS hardener, extra slow-drying -LHA 009 053 A2- |
| See technical data sheet for 2-pack VHS hardener
→ Chapter |
| 2-pack thinner, special -LVM 009 200 A2-/-LVM 009 200 A5- |
| 2-pack thinner, slow-drying -LVM 009 300 A2- |
| HS Spot thinner -LVM 006 000 A2- Please refer to technical
data sheet
→ Chapter „HS spot thinner“ |
| For elasticization, see
→ Anchor |
|
|
|
| Application time/pot life: |
| – |
Mixed for spraying: 60-90 minutes at +20°C (depending on the
hardener used) |
|
|
|
| Method of application: “spray”. |
|
|
|
| – |
The application viscosity at +20 °C is the “compliant” and
“HVLP” mixing viscosity. |
|
|
|
| – |
12.5 % Add 12.5% special 2-pack thinner -LVM 009 200
A2-/-LVM 009 200 A5-/slow-drying 2-pack thinner -LVM 009 300 A2-
at +20°C material temperature. |
|
|
|
| – |
Adjust spray nozzle following manufacturer's instructions to
1.2-1.3 mm for “compliancy”. |
| – |
Adjust spray nozzle following manufacturer's instructions to
1.3-1.4 mm for “HVLP”. |
| – |
Adjust spray pressure following manufacturer's instructions
to 2.0-2.5 bar for “compliancy”. |
| – |
Adjust atomising pressure following manufacturer's
instructions to 0.7 bar for “HVLP”. |
|
|
|
| – |
Apply in one-and-a-half coats. |
Note
| The first half-coat should form a nearly complete, thin film
over which a full spray coat is directly sprayed. |
| When used as clear coat for spot repairs (Clever Repair
method), 12.5% HS spot thinner -LVM 006 000 A2- may be
substituted for the 12.5% special 2-pack thinner -LVM 009 200
A2-. Do not apply to horizontal surfaces. |
| – |
The specified thickness for the dry film is 50-60 µm. |
|
|
|
| Air drying at +20 °C ambient temperature: |
| Dust dry in 20-30 minutes |
| Dry for assembly in 4-5 hours |
|
|
|
| Final flash-off time with force drying is at least
5-10 minutes. |
|
|
|
| Force drying at +60 °C material temperature in
20-30 minutes. |
|
|
|
| The final flash-off time with infrared drying is at least
5 minutes. |
|
|
|
| Infrared drying with short-wave radiant heater,
10-15 minutes and medium-wave radiant heater, 15-20 minutes. |
|
|
|
| Elasticization of rigid and semi-rigid plastics: |
| First mix the base material with 15% elastic additive -ALZ
011 001-. |
| Mixture with 2-pack HS hardeners, 2:1 |
| Mixture with 2-pack VHS hardeners, 3:1 with 20% thinner
(drying time increases) |
| When used as clear coat for spot repairs (Clever Repair
method), 12.5% HS spot thinner -LVM 009 200 A2-/-LVM 009 200 A5-
may be substituted for the 12.5% 2-pack thinner, special -LVM
006 000 A2-. Do not apply to horizontal surfaces. |
|
|
|
| Personal protective equipment: |
| Adhere to the safety data sheet. |
| Wear personal protective equipment during application. |
|
|
|
| Flash point: |
Above +23 °C |
| VOC content:
2004/42/IIB(d)(420)420 |
The EU limit value for this
product (product category IIB.b) in ready-to-spray form is max. 420 g/l
of volatile organic compounds. The VOC content of this product in
ready-to-spray form is max. 420 g/l. |
| The guaranteed storage time of 2-pack HS Vario clear coat
-L2K 769 K01 A5- is 48 months from production date. May be used
until the date stated on the label at latest if stored in sealed
original containers at +20 °C. |
|
|
|
Designation:
2-pack MS matt clear coat -L2K 769 020 A2-
Issued 08.2013
Product description
...
Designation:
2-pack HS Optimum clear coat -LZK 769 K02 A5-
Issued 10.2012
Product description
...
Other materials:
Removing and installing output module 2 for headlights,
»R«
WARNING
Risk of death due to high voltage! Risk of injury
and environmental pollution!
Observe operation and safety notes for gas discharge
bulbs
→ Chapte ...
Pedals
Fig. 132 Pedals in vehicles with a manual
gearbox: ① accelerator, ② brake pedal, ③ clutch pedal
Fig. 133 Pedals in vehicles with an automatic
gearbox: ① accelerator, ② brake pedal
First read and observe the introductory information
and safety warnings The operation and freedom ...
Function of air quality sensor -G238-
The air quality sensor detects noxious substances in the
ambient air (primarily petrol and/or diesel fumes).
The Climatronic control unit -J255- evaluates the signal
from the air quality sensor -G238-. The air conditioning system
i ...
© 2016-2024 Copyright www.vwgolf.org
2-pack MS matt clear coat
2-pack HS Optimum clear coat