VW Golf manuals

Tesla Model X 2015-2023 Owner's Manual: Speed Limit Mode

Speed Limit Mode allows you to limit acceleration and limit the maximum driving speed to a chosen value between 50 and 120 mph (80 and 193 km/h). The first time you use this feature, you must create a 4-digit PIN that you must use to enable and disable Speed Limit Mode. When enabled and the driving speed approaches within approximately 3 mph (5 km/h) of the maximum speed, a chime sounds, the instrument cluster displays a message, and Model X sends a notification to the mobile app. You can also touch Security > Speed Limit Mode to enable from the Tesla mobile app. To enable Speed Limit Mode:

1. Ensure Model X is in Park.

2. Touch Controls > Safety > Speed Limit Mode on the touchscreen.

3. Select the maximum driving speed.

4. Drag the slider to the On position.

5. Enter the 4-digit PIN that you want to use to enable and disable Speed Limit Mode.

NOTE: If you forget the PIN, you can disable Speed Limit Mode by entering login credentials for your Tesla account.

NOTE: While Speed Limit Mode is enabled, the acceleration setting (Controls > Pedals & Steering > Acceleration) automatically sets to Chill.

WARNING: Driving downhill can increase driving speed and cause Model X to exceed your chosen maximum speed.

WARNING: Speed Limit Mode is not a replacement for good judgment, driver training, and the need to closely monitor speed limits and driving conditions. Accidents occur at any speed.

PIN to Drive
To increase security, you can prevent Model X from being driven until a 4-digit PIN (Personal Identification Number) is entered. To enable this setting, touch Controls > Safety > PIN to Drive ...

Dashcam and Sentry Mode
NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Dashcam or Sentry Mode or the features may not operate exactl ...

Other materials:

Removing and installing catalytic converter
  Note The catalytic converter is removed together with the front exhaust pipe. Special tools and workshop equipment required High-temperature paste → Electronic Parts Catalogue. ...

Removing and installing tail light bulb -M2-/-M4-
  Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way. Removing –  Turn light switch to “0” position. ...

Changing headlights over from driving on right to driving on left (gas discharge headlights for cornering light and LED daytime running light)
If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling oncoming traffic with the asymmetric low beam headlights.   Note ...

© 2016-2023 Copyright www.vwgolf.org