Tesla Model X 2015-2023 Owner's Manual: Programming HomeLink
To program HomeLink:
1. Park Model X so that the front bumper is in front of the device you want to program.
CAUTION: Your device might open or close during programming. Therefore, before programming, make sure that the device is clear of any people or objects.
2. Check that the device's remote control has a healthy battery. Tesla recommends replacing the battery in the device's remote control before Programming HomeLink.
3. Touch the HomeLink icon at the top of the Controls screen.
4. Touch Create HomeLink.
5. Select the mode you wish to use: Standard, D-Mode, or UR-Mode.
6. On the touchscreen, enter a name for your device, then and touch Enter or Create HomeLink.
7. Touch Start and follow the onscreen instructions.
NOTE: If you see a screen called "Train the receiver" while programming the device, remember that this is a time-sensitive step. After pressing the Learn/ Program/Smart button on the device's remote control, you have only approximately 30 seconds to return to your vehicle and press Continue, and then press the trained HomeLink device name twice. Consider having an assistant to ensure you can complete this step within 30 seconds.
8. Once your device is programmed, touch Save to complete the programming.
9. Ensure HomeLink works as expected. In some cases, you may need to repeat the programming process multiple times before succeeding.
Once programmed, you can operate the device by touching its corresponding HomeLink icon on the touchscreen. HomeLink remembers the location of your programmed devices. When you approach a known location, the HomeLink control on the touchscreen automatically appears. When you drive away, it disappears.
NOTE: For additional assistance or compatibility questions, contact HomeLink (www.homelink.com or call 1-800-355-3515).
About HomeLink
f your vehicle is equipped with
the
HomeLink Universal Transceiver, you can
operate up to three Radio Frequency (RF)
devices, including garage doors, gates,
lights, and security systems.
NOTE: De ...
Auto Opening and Closing
To operate a HomeLink device without using the
touchscreen, you can automate the device to open as
you approach, and close as you drive away:
1. Touch the HomeLink icon at the top of the Controls
s ...
Other materials:
Removing and installing C-pillar trim, saloon
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Adjusting Second Row Seats
(Bench)
Second row bench seats can accommodate up to three
passengers. Use the mechanical adjustment lever
located at the side of each outboard seating position to
adjust the seat backs. A bench seat is split 60/40 so the
adjustment lever on the left side moves the seat backs
for both the left and cent ...
Overview of the menu structure
First read and observe the introductory information
and safety warnings The following menu structure shows how the Volkswagen
information system menus in the instrument cluster display are structured. The size
and layout of the Volkswagen information system menu depends on the vehicle electr ...
