You can adjust the opening height of the liftgate to make it easier to reach or to avoid low-hanging ceilings or objects (for example, a garage door or light):
1. Open the trunk, then manually lower or raise the liftgate to the desired opening height.
2. Press and hold the button on the underside of the liftgate for three seconds until you hear a confirmation chime.
3. Confirm that you have set it to the desired height by closing the liftgate, then reopening it.
CAUTION: Depending on configuration (such as suspension height or wheel selection), your vehicle's liftgate can open up to approximately 8 feet (2.5 meters) high. Adjust the liftgate height to prevent it from coming into contact with low ceilings or other objects.
Closing
To close the liftgate, do one of the following:
If the liftgate senses an obstruction when closing, it stops moving and chimes two times. Remove the obstruction and try closing it again.
Identification Labels
Vehicle Identification Number
You can find the VIN at the following locations:
Touch Controls > Software.
Stamped on a plate located at the top of the
dashboard. Can be seen by looking through the
windshield on the driver's side of the vehicle.
Printed on the Vehicle Certification labe ...
Assembly overview - front door window
Note
Only the left side is shown. The right side is similar.
1 -
Front door
2 -
Door window
Removing and installing
→ Chapter.
3 -
Inner door cover
Removing and insta ...
Removing and installing bonnet
Special tools and workshop equipment
required
Removing
Torque wrench -V.A.G 1331-
–
Remove s ...