Touch Controls > Pedals & Steering > Acceleration to choose a preferred acceleration mode:
NOTE: When Chill is selected, Chill displays on the instrument panel, above the driving speed.
NOTE: Using the increased torque and power available in Insane or Plaid mode can reduce range and efficiency.
NOTE: Insane or Plaid strives to keep the Battery within an optimal temperature range. In addition to heating the Battery, these settings also cool the battery when necessary (for example, while driving at high speeds, during rapid acceleration, driving for long periods, etc.).
In addition, Model X features Drag Strip Mode. Using Drag Strip Mode to precondition your Model X is useful before a short distance race.
Drag Strip Mode
Drag Strip Mode preconditions the Battery and drive unit to ideal operating temperatures for timed acceleration. Model X stays in Drag Strip Mode for three hours, even if you leave the vehicle. After three hours, the feature times out to prevent unnecessary energy consumption (for example, you leave the vehicle and forget to cancel Drag Strip Mode).
When using Drag Strip Mode, Model X consumes more energy to keep the Battery within an optimal temperature range.
Cancel Drag Strip Mode at any time by toggling Drag Strip Mode off.
NOTE: Drag Strip Mode automatically disables Slip Start when enabled.
WARNING: Drag Strip Mode is designed for use on closed circuit driving courses only. It is the driver's responsibility to ensure that driving style and acceleration do not endanger or inconvenience other road users.
How to Launch the Vehicle
The touchscreen provides visual instructions on how to launch:
1. Touch Controls > Pedals & Steering > Drag Strip Mode.
2. Wait for the instrument panel to indicate that the vehicle is Peak Performance Ready.
3. With Model X shifted into Drive and at a complete stop, firmly hold the brake pedal with your left foot, then fully press the accelerator pedal.
4. Once step 3 is complete, the front suspension begins lowering into a "cheetah stance".
5. Wait for the instrument panel to indicate that Drag Strip Mode is Ready to Launch.
6. Once you see "Cheetah Stance Enabled" and "Ready to launch" on the instrument panel, release the brake pedal to launch the vehicle.
Removing and installing lid for through-loading aperture
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410
Removing
–
Fold down centre armrest and open lid f ...
Temporary spare wheels
Notes on temporary spare wheels
Inform your customers about the following notes and, if
appropriate, refer also to the user's manual of the vehicle as
the need arises.
The followin ...
Repairing steering rack
1 -
Right track rod ball joint
Marked with “A”
→ Anchor
Removing and installing
→ Chapter
Installation position
→ Anchor
Allocation
→ Electro ...