Volkswagen Golf Service & Repair Manual: Spraying the evaporator with the suction feed spray-gun -V.A.G 1538- and spray lance

Volkswagen Golf Service & Repair Manual / Air conditioning system with refrigerant R134a / Complaints / Smells from heater and air conditioner unit / Spraying the evaporator with the suction feed spray-gun -V.A.G 1538- and spray lance

Spray the evaporator with Contra Sept directly using a spray lance (approx. 10 bar). Contra Sept neutralises microbes and bacteria directly at the evaporator.

In order to enable access to the evaporator, some preliminary work and different spray lances are necessary, e.g. V.A.G 1538/5; V.A.G 1538/6 or V.A.G 1538/7.

Vehicle-specific instructions for user are provided with the evaporator cleaning solution D 600 100 A2.

Current equipment and spray lances → ServiceNet Function “Search”

Ultrasonic air conditioner cleaning unit -VAS 6189A

The ultrasonic air conditioner cleaning unit -VAS 6189A- must be placed in the front-passenger footwell and sprays the agent Aero-Clean. Aero-Clean neutralises microb ...

Connecting air conditioner service station

For vehicles that have connections on both low-pressure and high-pressure sides of refrigerant circuit Connecting air conditioner s ...

Other materials:

Driving through water on roads
First read and observe the introductory information and safety warnings Please follow these rules to help prevent damage to your vehicle when driving through water, for example if the road is flooded: Check the depth of the water before driving through it. The water level must be no hi ...

Renewing pyrotechnic, electrical and mechanical components of the restraint system after an accident
Special tools and workshop equipment required Vehicle diagnostic tester Note The airbag control unit can be used for up to 2 side airbag and/or belt tensioner deploym ...

Corrosion protection for body components, add-on components and welded components
Attachments Wings, doors, covers and flaps must be coated completely on the inside as well. One wet-in-wet spray pass is adequate for this. Before installing, add-on parts must be sealed with cav ...