Volkswagen Golf Owners Manual: Preparation for working in the engine compartment
- Introduction
- Warning lamp
- Preparing the vehicle for working in the engine compartment
- Checklist
- Opening and closing the bonnet
Introduction
This chapter contains information on the following subjects:
→ Warning lamp
→ Preparing the vehicle for working in the engine compartment
→ Opening and closing the ...
Other materials:
Removing and installing drive shaft heat shield
Front-wheel drive:
Component
Specified
torque
Bolts -1-
25 Nm
Four-wheel drive:
...
Removing and installing dip beam screen motor -V294-/-V295
Note
Left dip beam screen motor -V294- and right dip beam screen
motor -V295- are only fitted on gas discharge headlights without
cornering light.
The dip beam screen motor is located in the headlight and
canno ...
General notes
Gearbox
The torque of the engine is transmitted via the flywheel to
the dual clutch gearbox. The flywheel and the dual clutch are
joined together by a toothed connection. Together they take on
the function of the dual-mass flywheel ...