VW Golf manuals

Volkswagen Golf Service & Repair Manual: Nuts and bolts

Loosen and tighten bolts and securing nuts for covers and housings diagonally.
Avoid canting particularly sensitive parts such as comtrol motor with control unit. Loosen and tighten them diagonally in stages.
Specified torques given are for unlubricated nuts, bolts and screws.
Always renew self-locking nuts and bolts.
 

Nuts and bolts

Steering rack
To achieve the desired results when performing repairs on the steering rack it is important to work with the greatest possible care and cleanliness, and to use proper ...

Electrical components
some point, you have probably received an electric shock when touching a metal object. This is due to the electrostatic charge accumulated by the human body. This cha ...

Other materials:

Assembly overview - rear vehicle level sender, torsion beam axle
  Note The rear left vehicle level sender -G76- is only available as a replacement part complete with coupling rod and upper and lower retaining plates. 1 -  Electrical connector 2 -  Bolt 5 Nm ...

Removing and installing rear underbody cover – e-Golf
Removing –  Remove bolts -2-. –  Unscrew nuts -3-. –  Remove underbody cover -1-. Installing Install analogously in reverse order, but note the following: Specified torque ...

Assembly overview - sump and oil pump
  Note Metal shavings or a large quantity of small metal particles found during engine repair could indicate that the crankshaft bearings or conrod bearings are damaged. To avoid any subsequent damage, the following work must be carried out following the repair: Caref ...

© 2016-2019 Copyright www.vwgolf.org