Moving mechatronic unit for dual clutch gearbox -J743- into removal position
by hand
Note
Only if you cannot set the mechatronic unit to removal position with
the vehicle diagnostic tester, you must set the unit by hand to removal
position.
Sometimes, the mechatronic unit cannot be removed. In this case, the
gear actuator for 6th gear ...
Removing and installing charge air cooler
Special tools and workshop equipment
required
Hose clamps up to 25 mm -3094-
Drip tray for workshop hoist -VAS 6208-
...
Removing and installing high-level brake light, Golf
Special tools and workshop equipment
required
Plastic wedge -T10039/1-
Removing:
–
Switch off ignition and all electrical loads, and pull out
...