Volkswagen Golf Service & Repair Manual: Equipment
- Assembly overview- net partition
- Assembly overview - sun visors
- Assembly overview - roof grab handle
- Removing and installing net partition
- Removing and installing net partition mounting
- Removing and installing bracket for net partition
- Removing and installing eyelet for net partition
- Removing and installing sun visor
- Removing and installing sun visor centre mount
- Removing and installing bracket for roof grab handle
Removing and installing storage compartment in roof headliner
Removing
–
Switch off ignition.
–
Unclip cover -1- from storage
compartment in roof headliner -3-. ...
Assembly overview- net partition
1 -
Net partition
Removing and installing
→ Chapter
2 -
Bolt
4.5 Nm
3 -
Remove fitting e ...
Other materials:
Checklist
Observe the following information both before and during every journey
to ensure your own safety, and the safety of all passengers and other road users
:
Check that all lights and turn signals
are working properly.
Check the tyre pressure ( Wheels and
tyres Wheels and tyres ...
Overview of fitting locations - components not located in passenger
compartment, Golf Variant RHD
1 -
Exhaust ventilation for passenger compartment
Checking
→ Chapter
Removing and installing
→ Chapter
2 -
Humidity sender for air conditioning system -G260-
Check v ...
Calibrating Blind Spot Monitor control unit -J1086-/-J1087-
Note
Before the actual calibration process of the control units,
the calibration unit -VAS 6350- needs to be set up as described
in the following chapter.
Special tools and workshop equipment
required
...