Wiring open circuit with one repair position
Repair position with single crimp connector
–
Place the wire to be repaired to one side (about 20 cm
either side of the repair position).
–
If necessary, unbind the wir ...
Releasing gas and draining rear gas-filled shock absorbers, conventional
shock absorbers
Clamp gas-filled shock absorber vertically in vice.
WARNING
Safety goggles must be worn when drilling.
–
Drill a 3 mm hole -A- through
...
Brake fluid
Fig. 144 In the engine compartment: cap
on the brake fluid container
First read and observe the introductory information
and safety warnings Brake fluid will gradually absorb water from the surrounding
air. The brake system will be damaged if there is too much water in the brake fluid.
T ...