VW Golf manuals

Volkswagen Golf Service & Repair Manual: Changing headlights over from driving on left to driving on right (gas discharge headlights)

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Headlight / Changing headlights over from driving on left to driving on right (gas discharge headlights)

If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling oncoming traffic with the asymmetric low beam headlights.
  Note
The conversion from driving on left to driving on right, or vice versa, is performed by means of the infotainment system.
It is only permissible to make use of the headlight converter for a short period of time. When permanently driving in the respective country during a longer period of time, suitable headlights need to be installed according to valid specifications.
–  On the display unit for front information display and operating unit control unit -J685-, press button CAR.
–  Press function buttons Setup and Light.
–  Perform adjustment in menu “Light Settings”.
Changing headlights over from driving on right to driving on left, LED headlights
If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling on ...

Changing headlights over from driving on left to driving on right (gas discharge headlights for cornering light and LED daytime running light)
If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling on ...

Other materials:

2-pack HS Vario surfacer
Designation:   2-pack HS Vario surfacer -LGF 786 004 A4-, grey Issued 04.2013 Product description 2-pack HS Vario surfacer is a high-grade, versatile, VOC-compliant 2-pa ...

Lowering rear axle, multi-link suspension, front-wheel drive, except for e-Golf
Special tools and workshop equipment required Assembly tool -3301- Assembly tool -3346- Torque wrench -V.A.G 1332- Engine and gearbox jack -V.A.G 1383 A-   Lower subframe ...

Adjusting clutch engagement
The position of the engagement bearings “K 1” and “K 2” must only be adjusted after the following work: Clutch has been renewed. Engaging levers were renewed. Small ba ...

© 2016-2021 Copyright www.vwgolf.org