Volkswagen Golf Service & Repair Manual: Assembly overview - automatic anti-dazzle interior mirror, with rain and light sensor -G397- and front camera for driver assist systems -R242-
| 1 - | Front cover |
- For mirror base
| 2 - | Retaining plate |
- For interior mirror
- Bonded to windscreen
| 3 - | Rear cover |
- For mirror base
| 4 - | Interior mirror |
- Removing and installing → Chapter
Assembly overview - manually operated or automatic anti-dazzle interior
mirror, with rain and light sensor -G397- and without front camera for driver
assist systems -R242-
1 -
Front cover
For mirror base
2 -
Main beam assist control unit -J844-
Equipment version
Not sold separately
3 -&n ...
Removing and installing manually operated anti-dazzle interior mirror,
without rain and light sensor -G397- and front camera for driver assist systems
-R242-
Removing
–
Turn interior mirror -2- anti-clockwise
-arrow- by 90° (1/4
turn).
–
Remove interior mirror -2- from
glued-on reta ...
Other materials:
Removing and installing gas strut
Removing
Note
The rear lid must be supported when a gas strut is removed. One gas
strut alone cannot support an open rear lid.
–
Open rear lid and brace it open.
...
Rodent proofing
First read and observe the introductory information
and safety warnings Rodent proofing equipment is made up of special brushes
and casings and impedes entry to the engine compartment by rodents when the bonnet
is shut. This prevents damage caused to components by rodent bites.
NOTICE
If ...
Notes on tow-starting
First read and observe the introductory information
and safety warningsVehicles should not be tow-started wherever possible.
Use jump leads to start the engine instead .
For technical reasons, the following vehicles cannot be tow-started:
Vehicles with an automatic gearbox.
Vehicle ...